Product description
This swashplate axial piston hydraulic pump has a through drive for open circuits and can be used singly or in multiple-pump combinations.
Technical features
• Low noise
• Fast response
• User-friendly operation
• High self-priming speed
• Compact design
• Through-drive design for 100% of nominal torque
General description
Recommended hydraulic fluids
High-quality mineral oil-based hydraulic fluids are recommended, such as HLP fluids conforming to standard DIN51524, Part 2. For general use, the Brugger value must exceed 30N/mm2. For heavy-duty hydraulic equipment and systems with fast cycles and/or heavy dynamic loads, it must exceed 50 N/mm2. Determine the Brugger value according to DIN 51347-2. See document HY30-3248/UK, Hydraulic Fluids for Parker PV Series Axial Piston Pumps, for details.
Viscosity
During normal operation, fluid viscosity should be 16 to 100 mm2/s (cSt). Maximum permissible starting viscosity is 800 mm2/s (cSt).
Filtration requirements
Effective fluid filtration is required to protect the system from contamination, maximize the performance of the pump and other hydraulic components, and extend service life.
Fluid cleanliness is assessed using the ISO solid-particle contamination classes specified in ISO 4406:1999. Filter the fluid using elements whose quality meets the relevant ISO standards.
For satisfactory operation of general hydraulic systems, fluid contamination must not exceed class 20/18/15 under ISO 4406:1999.
For long hydraulic component service life, fluid contamination must not exceed class 18/16/13 under ISO 4406:1999.
Seals
Refer to the hydraulic fluid specifications and check chemical compatibility with seal materials.
Check the seal material's permissible temperature range against the system's operating and ambient temperature ranges.
N – nitrile rubber -40 … +90 °C
Note: maximum fluid temperature occurs at the pump case drain and can be 25 °C above the tank temperature.
Control method
Electrohydraulic proportional displacement controller with closed-loop pressure control
Control option code UPM
The UPM electrohydraulic proportional displacement controller with closed-loop pressure control adds a Parker SCP 8181 CE pressure sensor to the UPK controller. Used with the PQDXXA-Z00 electronic control module, it enables closed-loop control of pump outlet pressure.
In addition to closed-loop pressure control, the module can provide electrically controlled constant-power displacement limiting.
Main applications include grate cooler hydraulic systems, tunnel washer presses, ship-lock gate hoists, oil drilling rigs and shale-gas fracturing trucks.
PV series electrohydraulic proportional control pump; proportional displacement control – FPV; proportional displacement control with pressure-compensator override – UPR/UPK; proportional displacement control with closed-loop pressure control – UPM; preload manifold for proportional control pumps – PVAPVV; fast-unloading relief manifold – PVAPSE; combined preload and fast-unloading relief manifold – PVAPVE; proportional displacement/proportional pressure control electrical wiring diagram; electrohydraulic proportional control pump dimensions 31.; proportional displacement control, proportional displacement control PV*R1K1T1NFPV; displacement servo spring, bias spring 42.; proportional displacement control, proportional displacement control with pressure-compensator override, with pressure-compensator override PV*R1K1T1NUPR/UPK (former model: former model UPD) 53.; proportional displacement control.
With closed-loop pressure control; proportional displacement control with closed-loop pressure control PV*R1K1T1NUPM (former model: former model UPG) 64.; preload manifold for proportional control pumps, preload manifold for proportional control pumps PVAPVV75.; fast-unloading relief manifold, fast-unloading relief manifold PVAPSE86.; combined preload and fast-unloading relief manifold, combined preload and fast-unloading relief manifold PVAPVE97.; proportional displacement control electrical wiring diagram, proportional displacement control electrical wiring diagram PV*R1K1T1NFPV107.; proportional displacement/proportional pressure control electrical wiring diagram, proportional pressure control electrical wiring diagram PV*R1K1T1NUPR/UPK/UPM118.; electrohydraulic proportional control pump dimensions, electrohydraulic proportional control pump dimensions FPG&UPG; more compact construction, small dimensions and good vibration resistance; all accessories can be removed and serviced separately to simplify logistics 128.; electrohydraulic proportional control pump dimensions, electrohydraulic proportional control pump dimensions FPV/UPR/UPK/UPM


Ordering code








Reviews
目前还没YesReviews