Product description
This swashplate axial piston hydraulic pump has a through drive for open circuits and can be used singly or in multiple-pump combinations.
Technical features
• Low noise
• Fast response
• User-friendly operation
• High self-priming speed
• Compact design
• Through-drive design for 100% of nominal torque
General description
Recommended hydraulic fluids
High-quality mineral oil-based hydraulic fluids are recommended, such as HLP fluids conforming to standard DIN51524, Part 2. For general use, the Brugger value must exceed 30N/mm2. For heavy-duty hydraulic equipment and systems with fast cycles and/or heavy dynamic loads, it must exceed 50 N/mm2. Determine the Brugger value according to DIN 51347-2. See document HY30-3248/UK, Hydraulic Fluids for Parker PV Series Axial Piston Pumps, for details.
Viscosity
During normal operation, fluid viscosity should be 16 to 100 mm2/s (cSt). Maximum permissible starting viscosity is 800 mm2/s (cSt).
Filtration requirements
Effective fluid filtration is required to protect the system from contamination, maximize the performance of the pump and other hydraulic components, and extend service life.
Fluid cleanliness is assessed using the ISO solid-particle contamination classes specified in ISO 4406:1999. Filter the fluid using elements whose quality meets the relevant ISO standards.
For satisfactory operation of general hydraulic systems, fluid contamination must not exceed class 20/18/15 under ISO 4406:1999.
For long hydraulic component service life, fluid contamination must not exceed class 18/16/13 under ISO 4406:1999.
Seals
Refer to the hydraulic fluid specifications and check chemical compatibility with seal materials.
Check the seal material's permissible temperature range against the system's operating and ambient temperature ranges.
N – nitrile rubber -40 … +90 °C
Note: maximum fluid temperature occurs at the pump case drain and can be 25 °C above the tank temperature.
Technical parameters
PV016 PV020 PV023 PV028 PV032 PV040 PV046
Housing size 1 1 1 1 2 2 2
Maximum displacement [cm3/rev.] 16 20 23 28 32 40 46
Output flow at 1500 rpm [l/min] 24 30 34.5 42 48 60 69
Nominal pressure pN [bar] 350 350 350 350 350 350 350
Maximum working pressure pmax, 20% duty cycle 1) [bar] 420 420 420 420 420 420 420
Case drain pressure, continuous [bar] 0.5 0.5 0.5 0.5 0.5 0.5 0.55
Maximum peak [bar] 2.0 2.0 2.0 2.0 2.0 2.0 2.0
Inlet pressure, minimum (absolute) [bar] 0.8 0.8 0.8 0.8 0.8 0.8 0.8
Maximum [bar] 16 16 16 16 16 16 16
Input power at 1500 rpm and 350 bar [kW] 15.5 19.5 22.5 27.5 31 39 45
Maximum speed at inlet pressure 1 bar (absolute) [rpm] 3000 3000 3000 3000 2800 2800 2800
Rotational inertia [kgm2] 0.0017 0.0017 0.0017 0.0017 0.0043 0.0043 0.0043
Weight [kg] 19 19 19 19 30 30 30
PV063 PV080 PV092 PV140 PV180 PV270 PV360
Housing size 3 3 3 4 4 5 5
Maximum displacement [cm3/rev.] 63 80 92 140 180 270 360
Output flow at 1500 rpm [l/min] 94.5 120 138 210 270 405 540
Nominal pressure pN [bar] 350 350 350 350 350 350 350
Maximum working pressure pmax, 20% duty cycle 1) [bar] 420 420 420 420 420 420 420
Case drain pressure, continuous [bar] 0.5 0.5 0.5 0.5 0.5 0.5 0.5
Maximum peak [bar] 2.0 2.0 2.0 2.0 2.0 2.0 2.0
Inlet pressure, minimum (absolute) [bar] 0.8 0.8 0.8 0.8 0.8 0.8 0.8
Maximum [bar] 16 16 16 16 16 16 16
Input power at 1500 rpm and 350 bar [kW] 61.5 78 89.5 136 175 263 350
Maximum speed at inlet pressure 1 bar (absolute) [rpm] 2800 2500 2300 2400 2200 1800 1750
Rotational inertia [kgm2] 0.018 0.018 0.018 0.030 0.030 0.098 0.103
Weight [kg] 59 59 59 90 90 172 180
Ordering code








Reviews
目前还没YesReviews