Product description
German HAWE R2, 5A piston pump is part of HAWE's R series. Our company has this pump in stock. Its suction and pressure valves have zero leakage. Keep the suction line as short as possible and the tank oil level at or above the suction connection so the pump inlet remains filled with oil when not operating.
Product description
Type R radial piston pumps comprise valve-controlled pump elements arranged radially around an eccentric. For high flow rates, up to 42 pump elements can be stacked in 6 radial groups. The outputs of the pump elements are combined into one or more pressure outlets.
Type R and RG radial piston pumps have enclosed housings. They can be used as motor-pump units outside the tank or installed inside a hydraulic power unit tank (see D 6010 H). Type RG radial piston pumps have a plain bearing with longer bearing life.
Features and benefits:
Excellent efficiency
Can operate with low-viscosity fluids
Fine flow-rate increments
Long service life
Operation independent of direction of rotation
Applications:
Industrial hydraulics
Test machines
Lubrication equipment
Hydraulic tools
Efficiency losses occur under the following conditions:
■ Viscosity > 500 mm2 /s and < 10 mm2 /s
■ Working pressure 2000 min-1; particularly with small valve diameters
R2.5A piston pump, German HAWE, special in-stock price, for cement plants
Drive torque is transmitted from the drive shaft through a cross coupling to the radial hydraulic cylinder-block rotor, without other lateral forces acting on the stator. The rotor is supported on the distributor shaft. Radially arranged pistons in the rotor are held against the eccentric stroke stator through hydrostatically balanced shoes. The axial piston assembly operates through volume changes produced by pistons reciprocating in bores parallel to the drive shaft. The round pistons and bores allow highly accurate fits during machining. Pistons connect to the shoes through ball joints and are secured by retaining clips. Two retaining rings hold the shoes against the stroke stator. Fluid enters and exits through passages in the pump body and distributor shaft, controlled by suction ports on the distributor shaft. Hydraulic forces in the body are absorbed by hydrostatically balanced surfaces. The friction pairs use overbalanced pressure compensation, forming open-loop control. The drive-shaft bearing provides support only and is not subject to other external forces.
Type R radial piston pumps comprise valve-distributed piston cylinders arranged radially. Parallel configurations of up to 6 rows provide higher flow output. The pump is normally motor-driven and connected by a flange and coupling. A particularly useful feature is the option for multiple pressure outlets.
Maximum pressure Pmax = 700bar; maximum flow Qmax = 91.2l/min, depending on the size. The radial piston pump's cylinders are arranged radially and use valve distribution. They can be configured in single, double or multiple rows, driven by an eccentric on the main shaft and returned by springs. The output from each piston is collected in a pressure manifold and discharged through a common pressure outlet.
The pump housing supports the cylinders and bearings. Rigorous static and dynamic balance testing ensures very stable operation. Except for single- and two-cylinder pumps, each row has an odd number of cylinders, so output pulsation is greatly reduced from three cylinders upward.
Whether installed outside the tank as a motor-pump unit or inside the tank as part of a complete hydraulic power unit, the pump must be below the tank fluid level. The radially arranged cylinders form an enclosed unit within the housing, so the pump can vent properly only during or after filling with oil.
HAWE models available from stock:
German HAWE R2, 5A piston pumps – R series hydraulic pump models are listed below:
HAWE R3.6A
R2.5A
R2.5
R5.6
R5.6A
R7.4
R8.3A
R11,8
R1.0
R 23,0
R1.25
R2.2.2.2.2
R11,8-11,8-11,8-11,8-11,8-11,8
R2.2-2.2-2.2-2.2-2.2A
R0.3-0.8-0.3-0.8-0.9
R9.8-9.8-9.8-9.8A
R 11,8-11,8-11,8-11,8
R 3,3-1,7-1,7-1,7-1,7A
and other R series hydraulic pumps R2.5A
VP1Z A24
GZ 3-1 G24
G3-0 G24
WN1D G24
VP1R-G24
BVG 2R-G24
LHK40F-11CPV-350
LHK22G-21-180/180
GR 2-0-G24
CRH 1





Reviews
目前还没YesReviews