Product description
The T6 series vane pump has 3 housing sizes (C, D and E). Each housing accepts the corresponding series of cartridge assemblies with different displacements, forming a size range. At atmospheric inlet pressure and maximum speed, flow and displacement ranges are:
C series: 10 to 100 ml/rev (3 to 31 gpm at 1200 rpm);
D series: 48 to 158 ml/rev (14 to 50 gpm at 1200 rpm);
E series: 132 to 227 ml/rev (42 to 72 gpm at 1200 rpm).
• High working pressure – rated working pressure up to 275 bar allows smaller hydraulic actuators, control valves and piping, reducing installation costs. Operating at lower pressure can extend service life. High volumetric efficiency – a typical value of 0.94, maintained even under load, improves productivity, reduces heat generation and hydraulic equipment operating costs, and permits full-pressure operation at speeds as low as 600rpm (400rpm for mobile pumps);
High mechanical efficiency – a typical value of 0.94 reduces energy loss;
Wide speed range – 600–2800 rpm (400–2800 rpm for mobile pumps), combined with large-displacement cartridges in small housings, optimizes operation and reduces noise. Capability at low speed (600 rpm, or 400 rpm for mobile pumps), low pressure and high viscosity (860 cSt, or 2000 cSt for mobile pumps) enables T6 series vane pumps to operate at low temperatures with low power consumption and no risk of seizure. Low pressure pulsation – approximately ±2 bar reduces hydraulic piping noise and extends the service life of other circuit components;
Low noise improves operational safety and acceptance.
High contamination resistance – double-lip vanes provide excellent contamination resistance and long service life;
A wide range of design parameters and options, including cartridge displacement, drive shaft type and port arrangement, simplifies selection to suit installation requirements;







Reviews
目前还没YesReviews